This 5'6 Lost rocket surfboard is a surfboard classic. This surfboard has a winged diamond tail so it will hold in bigger surf but still catch the waves with ease.

Lost Rocket Details:
5'4 x 18.75" x 2.25"
24.18 cubic Litres
FCS 5 Fin
2-6' Surf Learn More

The Maurice Cole Metro Surfboard combines width and thickness from the old retro fish, but introduces a tow inspired bottom rocker and a very deep concave. More width in the tail creates a larger sweet spot and an accentuated change in curve at the 1 mark loosens the board up. This board replaces all Fish type boards.

This design has a foot in both camps. Stability and float while still maintaining the edgy characteristics of speed and rippability. Evidence that you can occasionally teach an old dog new tricks.

The Metro is easy to turn and will suit surfers that like a retro feel, but want performance from a board. Unlike an old school fish the Metro 3 will sit high on steep fast sections and won’t morph into a shopping trolley style slide when you want to lay a full tilt cutback or carve deep lines into the wave face. Ask and you shall receive. This is no bog monster.

Maurice Cole Metro Surfboard Details:
6'6 x 22" x 2.75"
41.70 Cubic Litres
FCS Fins
1-5FT surf Learn More

Over the last 20 years of working and testing with the world’s elite surfers, Maurice Cole has continued to design and shape the magic surfboard for surfers from Curren, Occy, Margo and Slater to Taj, Trent and Ross Clarke-Jones. All the curves and rockers are all Original Designs and have been tested extensively for 12 months before releasing into the market.

The ATM is used in kid grommet boards, short boards, semi-guns or the next board up from a short board and in the bigger Indo/Hawaii guns, that are up to 10 foot long. This design has an elite pedigree and can be relied upon to ride in all conditions.

Pro surfers or advanced riders require a design to work in a variety of waves. The ATM can be relied upon for travel, as it will handle anything that Mother Nature throws at it!

Maurice Cole ATM Surfboard Details:
5'10 x 18.38" x 2.25"
26.70 Cubic Litres
FCS Fins
2-12FT Surf
Learn More

The Maurice Cole Pro Tow surfboard is based on the tow series evolution. The design has a deep concave that is punctuated by a sharp rail which in historical terms would have created a board that would go really fast in a straight line. The Protow ushers in a new era of speed and carve surfing with a rail that won’t let go even in the most critical bottom turn scenario.

The Protow pairs perfectly with the metro as the MC 2 board quiver. Width and volume in the right places create a board that quite often floats better than a conventional board 3 or 4 inches longer and facilitates tighter stronger turns with considerably less effort. This board will have you paddling over the grommets but will impress with its performance steep and deep.

Maurice Cole Pro Tow Details:
6'2 x 19.50" x 2.63"
32.60 Cubic Litres
FCS Fins
2-8FT Surf Learn More

The Maurice Cole Pro Tow surfboard is based on the tow series evolution. The design has a deep concave that is punctuated by a sharp rail which in historical terms would have created a board that would go really fast in a straight line. The Protow ushers in a new era of speed and carve surfing with a rail that won’t let go even in the most critical bottom turn scenario.

The Protow pairs perfectly with the metro as the MC 2 board quiver. Width and volume in the right places create a board that quite often floats better than a conventional board 3 or 4 inches longer and facilitates tighter stronger turns with considerably less effort. This board will have you paddling over the grommets but will impress with its performance steep and deep.

Maurice Cole Pro Tow Details:
6'6 x 20" x 2.75"
36.70 Cubic Litres
FCS Fins
2-8FT Surf Learn More

The Maurice Cole Pro Tow surfboard is based on the tow series evolution. The design has a deep concave that is punctuated by a sharp rail which in historical terms would have created a board that would go really fast in a straight line. The Protow ushers in a new era of speed and carve surfing with a rail that won’t let go even in the most critical bottom turn scenario.

The Protow pairs perfectly with the metro as the MC 2 board quiver. Width and volume in the right places create a board that quite often floats better than a conventional board 3 or 4 inches longer and facilitates tighter stronger turns with considerably less effort. This board will have you paddling over the grommets but will impress with its performance steep and deep.

Maurice Cole Pro Tow Details:
6'1 x 18.75" x 2 5/6"
FCS Fins
2-8FT Surf Learn More

Over the last 20 years of working and testing with the world’s elite surfers, Maurice Cole has continued to design and shape the magic surfboard for surfers from Curren, Occy, Margo and Slater to Taj, Trent and Ross Clarke-Jones. All the curves and rockers are all Original Designs and have been tested extensively for 12 months before releasing into the market.

The ATM is used in kid grommet boards, short boards, semi-guns or the next board up from a short board and in the bigger Indo/Hawaii guns, that are up to 10 foot long. This design has an elite pedigree and can be relied upon to ride in all conditions.

Pro surfers or advanced riders require a design to work in a variety of waves. The ATM can be relied upon for travel, as it will handle anything that Mother Nature throws at it!

Maurice Cole ATM Surfboard Details:
6' x 18.63" x 2.31"
28.60 Cubic Litres
FCS Fins
2-12FT Surf
Learn More

The Maurice Cole Reverse Vee Asymmetrical surfboard allows you to surf solid waves on a much shorter board due to it’s thickness and width, which is hidden by the concave of the bottom.

The rail of the Asymmetric is a lot more drawn out, which gives you the feeling of riding a “step-up shortboard” (except without all the un-wanted foam) this allows the board to hold your line and really drive thru your bottom turn, whilst maintain position in the critical section of the wave and releasing you straight up to the lip. Once you transfer your weight off the top, you can whip the board into a much tighter arc. The increased width and squashed tail on the outside rail acts like a “fishier surfboard” which give the board a quick release of the tail whilst maintaining your speed into the next section.

The sensation of riding the Asymmetric Model is very unique and allows you to really experiment with the lines you normally draw on a wave. It’s all about looking down the line!

Maurice Cole Reverse Vee Surfboard Details:
6'3 x 19" x 2.50"
31.73 Cubic Litres
FCS Fins
1-10FT Surf Learn More

The Maurice Cole Reverse Vee Asymmetrical surfboard allows you to surf solid waves on a much shorter board due to it’s thickness and width, which is hidden by the concave of the bottom.

The rail of the Asymmetric is a lot more drawn out, which gives you the feeling of riding a “step-up shortboard” (except without all the un-wanted foam) this allows the board to hold your line and really drive thru your bottom turn, whilst maintain position in the critical section of the wave and releasing you straight up to the lip. Once you transfer your weight off the top, you can whip the board into a much tighter arc. The increased width and squashed tail on the outside rail acts like a “fishier surfboard” which give the board a quick release of the tail whilst maintaining your speed into the next section.

The sensation of riding the Asymmetric Model is very unique and allows you to really experiment with the lines you normally draw on a wave. It’s all about looking down the line!

Maurice Cole Reverse Vee Surfboard Details:
6'3 x 19" x 2.50"
31.82 Cubic Litres
FCS Fins
1-10FT Surf Learn More

The Maurice Cole Reverse Vee Asymmetrical surfboard allows you to surf solid waves on a much shorter board due to it’s thickness and width, which is hidden by the concave of the bottom.

The rail of the Asymmetric is a lot more drawn out, which gives you the feeling of riding a “step-up shortboard” (except without all the un-wanted foam) this allows the board to hold your line and really drive thru your bottom turn, whilst maintain position in the critical section of the wave and releasing you straight up to the lip. Once you transfer your weight off the top, you can whip the board into a much tighter arc. The increased width and squashed tail on the outside rail acts like a “fishier surfboard” which give the board a quick release of the tail whilst maintaining your speed into the next section.

The sensation of riding the Asymmetric Model is very unique and allows you to really experiment with the lines you normally draw on a wave. It’s all about looking down the line!

Maurice Cole Reverse Vee Surfboard Details:
5'10 x 18.75" x 2.38"
27.13 Cubic Litres
FCS Fins
1-10FT Surf Learn More

The Lost Lay-Zboy surfboard is both a continuation and a break away from the Bottom Feeder and Plank Genre surfboards. The Lay-Zboy takes these high volume low rocker small wave surfboard designs and brings it to a wider range of surf capabilities. This surfboard uses an eliptical outline influenced by Wayne Lynch & Michael Peterson in the 1970's as well as Dave Parmenter in the 80's and 90's. These eliptical outlines give the Lay-Zboy a very open and forgiving sweet spot and allow the board to be surfed in knee to well overhead waves.

Lost Lay-Zboy details:
5'5 x 20.25" x 2.35"
29.2 cubic litres
FCS 5 fin set up
Keahana Epoxy Learn More

The Lost Couch Potato surfboard is the extreme small wave surfboard. It is wider, shorter, and has a really flat rocker. The outline and the rocker of this board make it extremely fast, yet very controllable in gutless surf.

Lost Couch Potato details:

5'6 x 21.5" x 2.38"
33.31 Cubic Litres
FCS 5 fin set up
1-4 foot surf Learn More

The Lost Couch Potato surfboard is the extreme small wave surfboard. It is wider, shorter, and has a really flat rocker. The outline and the rocker of this board make it extremely fast, yet very controllable in gutless surf.

Lost Couch Potato details:

5'4 x 21" x 2.32"
30.63 Cubic Litres
FCS 5 fin set up
1-4 foot surf Learn More

This Rider Shack 5'8 surfboard is a classic retro fish board. This board has glassed on wood keel fins and is a great wave catcher.

Surfboard details:
5'8 x 21" x 2 5/8"
Glass on Fins Learn More

This Rider Shack 8'7 Longboard surfboard is a great board for beginners and longboard lovers alike. This board is Made in California.

Details:
8'7 x 23" x 2 7/8"
2 +1 Fin Setup Learn More

The Rider Shack 8'6 Longboard surfboard is a great board for the longboard enthusiast or for a beginner surfer. This surfboard will make wave catching a breeze. MAde in California.

Details:
8'6 x 23" x 3"
2+1 Fin Setup Learn More

The 8' Rider Shack mini longboard surfboard is a great board to have in the quiver for small days. This board will catch waves with ease and will still turn.

Rider Shack Surfboard details:
8' x 22.5" x 2 7/8"
2 +1 Fin Setup Learn More

This 7'10 Rider Shack funboard surfboard is a great shape for a beginner or a surfer looking to catch tons of waves. This board is made in california.

Surfboard Details:
7'10 x 22" x 2 7/8"
FCS Fins
Learn More

The Lost Sub Scorcher 2 surfboard is a fresh twist on the extremely popular Sub Scorcher model. The Vee bottom was removed from the last 6" of the tail which increases the rocker by about a 1/4" still keeping the rail line static. As a result the board surfs looser for better vertical and pocket surfing. To keep the board fast with losts of drive Lost straightened the outline in the tail by adding the double wing swallow tail. This is a great everyman's daily average wave shortboard.

Lost Sub Scorcher 2 Details:
5'10 x 19.25" x 2.38"
29.34 Cubic Litres
FCS Fins
2-5 foot surf Learn More

Lost 6' Pelagic Fish Surfboard:

In surfboards, everything is balance. Curvy rockers need to balance with straighter outlines and curvy outlines need flatter rockers. These principles became very apparent in the development of the Pelagic. Beginning with a fairly standard RNF template, we added a point at 12” from the tail and carved a reverse, side-cut, outline from there forward, into the wide point just above center. This effectively creates a reversed curve outline between the riders stance. To balance the negative outline curve, we have added a tremendous amount of rail rocker through the center of the board. The final component is very low, straight and fast centerline rocker, which cuts a massively deep concave through the rail rocker.

Details:

• 6' x 21" x 2.56"


• FCS 5-Fin


• 36.12 Cubic Liters

Learn More

The Lost Mini Driver surfboard is a great bigger wave surfboard that can be ridden shorter by a few inches than your traditional shortboard. This board has a slightly flatter rocker with a pulled in tail so it can handle the 2' slop and the macking barrels. Here is details about the surfboard as described by shaper Matt Biolos. Mini Driver – While preparing a quiver for an Indo trip Kolohe asked for “a short, fast (flat rockered) little 5 fin tube rider”. I recommended the Rock-Up, but he felt it had more tail rocker than he liked and wanted something really, really fast that he could take off extremely deep and pump through tubes from way back. We started with a 6’0” Driver, took note of the nose rocker and outline measurements at 4” and 16” back from the tip, then shrunk the board to a 5’8” and lowered the nose rocker at the tip and 12” back till it matched the 4” and 16” from before. We widened the nose until it matched up the same way. This gave us a screaming fast low nose rocker with a forward placed outline, both attributes give tons of drive. We then rounded off the tail, but left the width at 12” the same. This gave us a very clean and elliptical outline that we expected would move free and easy inside the tube. The Mini Driver performed as hoped. Interestingly enough, one of Kolohe’s buddies (Taylor Clark) grabbed it after it came back from Indo and used it in the US Nationals event in Huntington Beach. He surfed it in 2’ slop all the way to a second place finish in the Open Men’s division. The board worked in everything.

Lost Mini Driver Details:


5'9 x 19.25" x 2.32"

27.15 Cubic Liters

FCS Fins/5 fin setup

3-7 foot surf Learn More

The Lost Mini Driver surfboard is a great bigger wave surfboard that can be ridden shorter by a few inches than your traditional shortboard. This board has a slightly flatter rocker with a pulled in tail so it can handle the 2' slop and the macking barrels. Here is details about the surfboard as described by shaper Matt Biolos. Mini Driver – While preparing a quiver for an Indo trip Kolohe asked for “a short, fast (flat rockered) little 5 fin tube rider”. I recommended the Rock-Up, but he felt it had more tail rocker than he liked and wanted something really, really fast that he could take off extremely deep and pump through tubes from way back. We started with a 6’0” Driver, took note of the nose rocker and outline measurements at 4” and 16” back from the tip, then shrunk the board to a 5’8” and lowered the nose rocker at the tip and 12” back till it matched the 4” and 16” from before. We widened the nose until it matched up the same way. This gave us a screaming fast low nose rocker with a forward placed outline, both attributes give tons of drive. We then rounded off the tail, but left the width at 12” the same. This gave us a very clean and elliptical outline that we expected would move free and easy inside the tube. The Mini Driver performed as hoped. Interestingly enough, one of Kolohe’s buddies (Taylor Clark) grabbed it after it came back from Indo and used it in the US Nationals event in Huntington Beach. He surfed it in 2’ slop all the way to a second place finish in the Open Men’s division. The board worked in everything.

Lost Mini Driver Details:


5'8 x 19" x 2.32"

26.30 Cubic Liters

FCS Fins/5 fin setup

3-7 foot surf Learn More

The Lost Mini Driver surfboard is a great bigger wave surfboard that can be ridden shorter by a few inches than your traditional shortboard. This board has a slightly flatter rocker with a pulled in tail so it can handle the 2' slop and the macking barrels. Here is details about the surfboard as described by shaper Matt Biolos. Mini Driver – While preparing a quiver for an Indo trip Kolohe asked for “a short, fast (flat rockered) little 5 fin tube rider”. I recommended the Rock-Up, but he felt it had more tail rocker than he liked and wanted something really, really fast that he could take off extremely deep and pump through tubes from way back. We started with a 6’0” Driver, took note of the nose rocker and outline measurements at 4” and 16” back from the tip, then shrunk the board to a 5’8” and lowered the nose rocker at the tip and 12” back till it matched the 4” and 16” from before. We widened the nose until it matched up the same way. This gave us a screaming fast low nose rocker with a forward placed outline, both attributes give tons of drive. We then rounded off the tail, but left the width at 12” the same. This gave us a very clean and elliptical outline that we expected would move free and easy inside the tube. The Mini Driver performed as hoped. Interestingly enough, one of Kolohe’s buddies (Taylor Clark) grabbed it after it came back from Indo and used it in the US Nationals event in Huntington Beach. He surfed it in 2’ slop all the way to a second place finish in the Open Men’s division. The board worked in everything.

Lost Mini Driver Details:


5'10 x 19.5" x 2.38"

28.42 Cubic Liters

FCS Fins/5 fin setup

3-7 foot surf Learn More

Derived from the Whiplash-TB. The TB-Stepdown is more of an “every-mans” high performance shortboard. Used by many WT and Qualifying Series competitors, because it works equally well in small junk surf. Featuring the Same WL-TB, hyper extended tail rocker (for tight radius arcs off the back foot) but a significantly more relaxed entry rocker, which combined with a wider nose allows for more drive and forward momentum , and stability, with a bigger landing platform from reverse and tweaked airs. A wider hip and tail block is added to the outline in the tail for more lift at low speeds, but the tail width at 12” is relatively the same as the WL- TB. This allows for superior precision and control than most al other “grovel” boards. With the centerline and rail volume is carried farther into the rails….and out to nose and tail the TB-stepdown is designed to be ridden 1-2” shorter than the WLashTB. In the right size, this is a HP shortboard that can be ridden and enjoyed by most surfers.



Lost Taj Burrow Beach Buggy Details:


6'4 x 19.75" x 2.63"


FCS Fins


34.27 Cubic Litres Learn More

The Lost Couch Potato surfboard is the extreme small wave surfboard. It is wider, shorter, and has a really flat rocker. The outline and the rocker of this board make it extremely fast, yet very controllable in gutless surf.

Lost Couch Potato details:


5'8 x 22 x 2.32

36.90 Cubic Litres

FCS 5 fin set up

1-4 foot surf Learn More

Derived from the Whiplash-TB. The TB-Stepdown is more of an “every-mans” high performance shortboard. Used by many WT and Qualifying Series competitors, because it works equally well in small junk surf. Featuring the Same WL-TB, hyper extended tail rocker (for tight radius arcs off the back foot) but a significantly more relaxed entry rocker, which combined with a wider nose allows for more drive and forward momentum , and stability, with a bigger landing platform from reverse and tweaked airs. A wider hip and tail block is added to the outline in the tail for more lift at low speeds, but the tail width at 12” is relatively the same as the WL- TB. This allows for superior precision and control than most al other “grovel” boards. With the centerline and rail volume is carried farther into the rails….and out to nose and tail the TB-stepdown is designed to be ridden 1-2” shorter than the WLashTB. In the right size, this is a HP shortboard that can be ridden and enjoyed by most surfers.

Lost Taj Burrow Beach Buggy Details:

5'11 x 19" x 2.32"
FCS Fins
27.81 Cubic Litres Learn More

The Lost Sub Scorcher 2 surfboard is a fresh twist on the extremely popular Sub Scorcher model. The Vee bottom was removed from the last 6" of the tail which increases the rocker by about a 1/4" still keeping the rail line static. As a result the board surfs looser for better vertical and pocket surfing. To keep the board fast with losts of drive Lost straightened the outline in the tail by adding the double wing swallow tail. This is a great everyman's daily average wave shortboard.



Lost Sub Scorcher 2 Details:

5'10 x 19.25 x 2.38


29.19 Cubic Litres


FCS 5 fin setup

2-5 foot surf

Learn More

This Chili 6'3 shortboard surfboard is made from a molded epoxy construction and is a great durable high performance shortboard.

Chili surfboard details:

6'3 x 18.5" x 2 5/16"
FCS Fins Learn More

The Placebo Scorcher surfboard is a molded epoxy version of the Lost Scorcher. This board is a great performance shortboard.

Placebo Scorcher Details:

5'9 x 18.38" x 2.18"
FCS Fins
Epoxy Learn More

This Placebo Grom Feeder surfbaord is just like the Lost Bottom Feeder and would make a great small wave surfboard for a grom.

Grom Feeder Details:

4'8 x 18.5 x 2.18"
20.62 Cubic Litres
FCS Thruster Learn More

This Placebo Grom Feeder surfbaord is just like the Lost Bottom Feeder and would make a great small wave surfboard for a grom.

Grom Feeder Details:

4'10 x 19" x 2.25"
22.50 Cubic Litres
FCS Thruster Learn More

Designed to be ridden 2-4” longer than you would a Rocket. The low entry rocker, flat deck and tapered rails (with a full forward outline) paddles through crowds and moving water, and catches waves with ease. The pulled in tail, combined with the aggressive tail rocker and a smoother, shallower concave, allows controlled maneuvers at high speeds on chest high to double overhead waves

Board Details:

6'4 x 20 x 2.63

FCS Fins

36.99 cL Learn More

Designed to be ridden 2-4” longer than you would a Rocket. The low entry rocker, flat deck and tapered rails (with a full forward outline) paddles through crowds and moving water, and catches waves with ease. The pulled in tail, combined with the aggressive tail rocker and a smoother, shallower concave, allows controlled maneuvers at high speeds on chest high to double overhead waves

Board Details:

6'6 x 2.50 x 2.75

FCS Fins

40.70 cL Learn More

The Lost Couch Potato surfboard is the extreme small wave surfboard. It is wider, shorter, and has a really flat rocker. The outline and the rocker of this board make it extremely fast, yet very controllable in gutless surf.

Lost Couch Potato details:


5'6 x 21" x 2.32"

30.63 Cubic Litres

FCS/5

1-4 foot surf Learn More

Designed to be ridden 2-4” longer than you would a Rocket. The low entry rocker, flat deck and tapered rails (with a full forward outline) paddles through crowds and moving water, and catches waves with ease. The pulled in tail, combined with the aggressive tail rocker and a smoother, shallower concave, allows controlled maneuvers at high speeds on chest high to double overhead waves

Board Details:

6'4 x 20 x 2.63

FCS Fins

36.27 cL Learn More

In surfboards, everything is balance. Curvy rockers need to balance with straighter outlines and curvy outlines need flatter rockers. These principles became very apparent in the development of the Pelagic. Beginning with a fairly standard RNF template, we added a point at 12” from the tail and carved a reverse, side-cut, outline from there forward, into the wide point just above center. This effectively creates a reversed curve outline between the riders stance. To balance the negative outline curve, we have added a tremendous amount of rail rocker through the center of the board. The final component is very low, straight and fast centerline rocker, which cuts a massively deep concave through the rail rocker.

Lost Pelagic Surfboard Details:


6'1 x 21.25" x 2.63"

FCS 5-Fin

37.13 Cubic Liters Learn More

The Lost Couch Potato surfboard is the extreme small wave surfboard. It is wider, shorter, and has a really flat rocker. The outline and the rocker of this board make it extremely fast, yet very controllable in gutless surf.

Lost Couch Potato details:


5'10 x 22.5" x 2.63"

39.14 Cubic Litres

Future Fins

1-4 foot surf Learn More

Using the classic “Whiplash” model as a starting point, this board has now become the most refined and streamlined design in our line. Based of of TBs winning board from the 2012 Quiksilver Pro (Snapper Rocks) it is relatively low volume board , with continuous rocker (to fit where ever TB wants to go on the wave) and deep concaves (for lift and the speed to get there ). A relaxed central rocker maintains speed and carry through the flats, while hyper-extended tail kick in the last 16” and a moderately lifted nose keep the board free, loose and responsive. The outline also has an aggressive, continuous curve , cutting out all the unneeded surface area, thus no hip or bump in front of the fins that most of our boards feature. The nose, while not as needle or narrow as in the past, is still pulled enough to not get in the way of TBs fast and critical, tight radius turns. Although not for everyone, this board is relatively easy to ride and is best for younger and fit surfers who are above average, have no problem creating their own speed, and surf regularly in punchy beach or decent quality point breaks and want to surf as critical and radical as possible.

Details:

6'2 x 18.88 x 2.32

FCS Thruster

28.91 cubic litre

Learn More

Derived from the Whiplash-TB. The TB-Stepdown is more of an “every-mans” high performance shortboard. Used by many WT and Qualifying Series competitors, because it works equally well in small junk surf. Featuring the Same WL-TB, hyper extended tail rocker (for tight radius arcs off the back foot) but a significantly more relaxed entry rocker, which combined with a wider nose allows for more drive and forward momentum , and stability, with a bigger landing platform from reverse and tweaked airs. A wider hip and tail block is added to the outline in the tail for more lift at low speeds, but the tail width at 12” is relatively the same as the WL- TB. This allows for superior precision and control than most al other “grovel” boards. With the centerline and rail volume is carried farther into the rails….and out to nose and tail the TB-stepdown is designed to be ridden 1-2” shorter than the WLashTB. In the right size, this is a HP shortboard that can be ridden and enjoyed by most surfers.

Lost Taj Burrow Beach Buggy Details:

• 6'1 x 19.38 x 2.38"


• FCS Fins


• 29.79 Cubic Litres

Learn More

Derived from the Whiplash-TB. The TB-Stepdown is more of an “every-mans” high performance shortboard. Used by many WT and Qualifying Series competitors, because it works equally well in small junk surf. Featuring the Same WL-TB, hyper extended tail rocker (for tight radius arcs off the back foot) but a significantly more relaxed entry rocker, which combined with a wider nose allows for more drive and forward momentum , and stability, with a bigger landing platform from reverse and tweaked airs. A wider hip and tail block is added to the outline in the tail for more lift at low speeds, but the tail width at 12” is relatively the same as the WL- TB. This allows for superior precision and control than most al other “grovel” boards. With the centerline and rail volume is carried farther into the rails….and out to nose and tail the TB-stepdown is designed to be ridden 1-2” shorter than the WLashTB. In the right size, this is a HP shortboard that can be ridden and enjoyed by most surfers.

Lost Taj Burrow Beach Buggy Details:

• 5'10 x 18.75" x 2.25"


• FCS Fins


• 26.26 Cubic Litres

Learn More

The Lost Sub Scorcher 2 surfboard is a fresh twist on the extremely popular Sub Scorcher model. The Vee bottom was removed from the last 6" of the tail which increases the rocker by about  a 1/4" still keeping the rail line static. As a result the board surfs looser for better vertical and pocket surfing. To keep the board fast with losts of drive Lost straightened the outline in the tail by adding the double wing swallow tail. This is a great everyman's daily average wave shortboard.

Lost Sub Scorcher 2 Details:

• 6'4 x 20.75" x 2.75"


• 39.38 Cubic Litres


• FCS Fins


• 2-5 foot surf

Learn More

In surfboards, everything is balance. Curvy rockers need to balance with straighter outlines and curvy outlines need flatter rockers. These principles became very apparent in the development of the Pelagic. Beginning with a fairly standard RNF template, we added a point at 12” from the tail and carved a reverse, side-cut, outline from there forward, into the wide point just above center. This effectively creates a reversed curve outline between the riders stance. To balance the negative outline curve, we have added a tremendous amount of rail rocker through the center of the board. The final component is very low, straight and fast centerline rocker, which cuts a massively deep concave through the rail rocker.

Lost Pelagic Surfboard Details:

• 5'8 x 20" x 2.38"


• FCS 5-Fin


• 29.94 Cubic Liters

Learn More

Lost 5'11 Pelagic Fish Surfboard:

In surfboards, everything is balance. Curvy rockers need to balance with straighter outlines and curvy outlines need flatter rockers. These principles became very apparent in the development of the Pelagic. Beginning with a fairly standard RNF template, we added a point at 12” from the tail and carved a reverse, side-cut, outline from there forward, into the wide point just above center. This effectively creates a reversed curve outline between the riders stance. To balance the negative outline curve, we have added a tremendous amount of rail rocker through the center of the board. The final component is very low, straight and fast centerline rocker, which cuts a massively deep concave through the rail rocker.

Details:

• 5'11 x 20.75 x 2.5


• FCS 5-Fin


• 34.42 Cubic Liters

Learn More

Firewire 5'8 Lost Sub Scorcher

Firewire technology relies primarily on the PARABOLIC Balsa Rail to control flex while the high density aerospace composite vacuumed to both top and bottom decks provides significant impact strength, and is stronger than the traditional PU surfboard.

“I wanna board for 1′ mush. Something really short and wide, but still a short board…..something like Danes board.” –Kolohe Andino

The challenged was laid down. Starting with an old SD2: We squashed the dims to 5’5″x18.63″x 2.13″, lowered the entry rocker and shallowed the concave through the center to straighten the rail line for drive and make it easier to lay such a wide platform over on a rail. “Viola!” Our stubbiest short board yet, but it still carves like a real board. Kolohe wanted to call it “The Trashcan Lid” because you don’t need to go dumpster diving to get one of these!

Details:
Learn More

Firewire 5'8 Lost Sub Scorcher

Firewire technology relies primarily on the PARABOLIC Balsa Rail to control flex while the high density aerospace composite vacuumed to both top and bottom decks provides significant impact strength, and is stronger than the traditional PU surfboard.

“I wanna board for 1′ mush. Something really short and wide, but still a short board…..something like Danes board.” –Kolohe Andino

The challenged was laid down. Starting with an old SD2: We squashed the dims to 5’5″x18.63″x 2.13″, lowered the entry rocker and shallowed the concave through the center to straighten the rail line for drive and make it easier to lay such a wide platform over on a rail. “Viola!” Our stubbiest short board yet, but it still carves like a real board. Kolohe wanted to call it “The Trashcan Lid” because you don’t need to go dumpster diving to get one of these!

Details:
Learn More

This Lost Surfboard is Kolohe Andino's small wave groveling surfboard model. This surfboard is a blend of Lost's Scorcher and SD2 model shrunken and widened. This board has a low entry rocker which makes catching waves a breeze. This surfboard catches waves like a fish but still surfs like a true shortboard surfboard.

Lost Sub Scorcher Details:

• 5'11 x 19.75" x 2.38"


• 30.01 Cubic Liters


• Keahana Epoxy Construction


• FCS Fins


• Best suited Waves 2-6"

Learn More

This Lost Sub-Driver Surfboard is a great beach break surfboard that will handle small to mid sized waves. This board has a little more nose rocker and a flatter tail rocker.

Lost Sub Driver Details:

• 5'8 x 18.75" x 2.25"


• 25.63 Cubic Liters


• FCS Fins


• Keahana Epoxy construction


• Best in 2'-6' Surf

Learn More

The Super Fish II has been updated for 2012 making one of the most popular boards even better. The idea behind the Super Fish design is to offer a board that rides, paddles and catches waves easily regardless of your ability.

The generous outline and smooth rocker makes this board incredibly easy to ride. One of the most notable features of the Super Fish design is the step deck. This gives the board greater buoyancy while maintaining a performance rail profile making the board sensitive and easier to turn.

The new bottom contour features a deep single-to-double concave providing greater speed and acceleration. The tail wings are now more defined creating bite off the bottom and quicker release through turns. The swallowtail is also shallower than before. This adds surface area under your back foot meaning more speed in flatter waves.

FCS plugs are set up in a tri-quad configuration so you can ride it as a thruster or a quad, and our X2 Epoxy technology uses a multi-layered sandwich process that produces a light yet incredibly durable surfboard that’s ideal for travel.

If you're looking for a high volume, easy to ride surfboard that'll increase your wave count then the Super Fish II is the board for you.

7S Super Fish II Surfboard Details:

• 5'9 x 20 x 2.25"


• 25.9 Cubic Litres


• FCS Fins (quad Set included)


• Waist to head high surf

Learn More

The Super Fish II has been updated for 2012 making one of the most popular boards even better. The idea behind the Super Fish design is to offer a board that rides, paddles and catches waves easily regardless of your ability.

The generous outline and smooth rocker makes this board incredibly easy to ride. One of the most notable features of the Super Fish design is the step deck. This gives the board greater buoyancy while maintaining a performance rail profile making the board sensitive and easier to turn.

The new bottom contour features a deep single-to-double concave providing greater speed and acceleration. The tail wings are now more defined creating bite off the bottom and quicker release through turns. The swallowtail is also shallower than before. This adds surface area under your back foot meaning more speed in flatter waves.

FCS plugs are set up in a tri-quad configuration so you can ride it as a thruster or a quad, and our X2 Epoxy technology uses a multi-layered sandwich process that produces a light yet incredibly durable surfboard that’s ideal for travel.

If you're looking for a high volume, easy to ride surfboard that'll increase your wave count then the Super Fish II is the board for you.

7S Super Fish II Surfboard Details:

• 8'0 x 23 x 3"


• 66.9 Cubic Litres


• FCS Fins (quad Set included)


• Waist to head high surf

Learn More