The Maurice Cole Pro Tow surfboard is based on the tow series evolution. The design has a deep concave that is punctuated by a sharp rail which in historical terms would have created a board that would go really fast in a straight line. The Protow ushers in a new era of speed and carve surfing with a rail that won’t let go even in the most critical bottom turn scenario.

The Protow pairs perfectly with the metro as the MC 2 board quiver. Width and volume in the right places create a board that quite often floats better than a conventional board 3 or 4 inches longer and facilitates tighter stronger turns with considerably less effort. This board will have you paddling over the grommets but will impress with its performance steep and deep.

Maurice Cole Pro Tow Details:
6'1 x 18.75" x 2 5/6"
FCS Fins
2-8FT Surf Learn More

The Maurice Cole Reverse Vee Asymmetrical surfboard allows you to surf solid waves on a much shorter board due to it’s thickness and width, which is hidden by the concave of the bottom.

The rail of the Asymmetric is a lot more drawn out, which gives you the feeling of riding a “step-up shortboard” (except without all the un-wanted foam) this allows the board to hold your line and really drive thru your bottom turn, whilst maintain position in the critical section of the wave and releasing you straight up to the lip. Once you transfer your weight off the top, you can whip the board into a much tighter arc. The increased width and squashed tail on the outside rail acts like a “fishier surfboard” which give the board a quick release of the tail whilst maintaining your speed into the next section.

The sensation of riding the Asymmetric Model is very unique and allows you to really experiment with the lines you normally draw on a wave. It’s all about looking down the line!

Maurice Cole Reverse Vee Surfboard Details:
6'3 x 19" x 2.50"
31.73 Cubic Litres
FCS Fins
1-10FT Surf Learn More

The Maurice Cole Reverse Vee Asymmetrical surfboard allows you to surf solid waves on a much shorter board due to it’s thickness and width, which is hidden by the concave of the bottom.

The rail of the Asymmetric is a lot more drawn out, which gives you the feeling of riding a “step-up shortboard” (except without all the un-wanted foam) this allows the board to hold your line and really drive thru your bottom turn, whilst maintain position in the critical section of the wave and releasing you straight up to the lip. Once you transfer your weight off the top, you can whip the board into a much tighter arc. The increased width and squashed tail on the outside rail acts like a “fishier surfboard” which give the board a quick release of the tail whilst maintaining your speed into the next section.

The sensation of riding the Asymmetric Model is very unique and allows you to really experiment with the lines you normally draw on a wave. It’s all about looking down the line!

Maurice Cole Reverse Vee Surfboard Details:
6'3 x 19" x 2.50"
31.82 Cubic Litres
FCS Fins
1-10FT Surf Learn More

The INT 9' soft top longboard surfboard is a perfect board for learning to surf. These boards catch waves easy and are super stable. These boards are made in the USA.

We sell these boards by assorted color but can order specific colors. Colors available are White, Blue, Green, Yellow, Red, Pink, Black. If you have a color preference please specify at checkout. Learn More

This Lost Driver surfboard is a great all around high performance surfboard that isn't impossible to hop back on after riding your fish for a month in junk surf. This is a great surfboard for 2' mush surf and 6' macking waves. This board is designed to be ridden close to normal shortboard dimensions and has the wide point pushed back for quick tight turns.

Lost Driver Surfboard Details:
6'1 x 18.88" x 2.25"
27.41 Cubic Litres
Future Fins Learn More

Designed to be ridden 2-4” longer than you would a Rocket. The low entry rocker, flat deck and tapered rails (with a full forward outline) paddles through crowds and moving water, and catches waves with ease. The pulled in tail, combined with the aggressive tail rocker and a smoother, shallower concave, allows controlled maneuvers at high speeds on chest high to double overhead waves

Board Details:

6'3 x 19.75 x 2.75

FUTURE Fins

34.40 cL Learn More

This Chili 6'3 shortboard surfboard is made from a molded epoxy construction and is a great durable high performance shortboard.

Chili surfboard details:

6'3 x 18.5" x 2 5/16"
FCS Fins Learn More

In surfboards, everything is balance. Curvy rockers need to balance with straighter outlines and curvy outlines need flatter rockers. These principles became very apparent in the development of the Pelagic. Beginning with a fairly standard RNF template, we added a point at 12” from the tail and carved a reverse, side-cut, outline from there forward, into the wide point just above center. This effectively creates a reversed curve outline between the riders stance. To balance the negative outline curve, we have added a tremendous amount of rail rocker through the center of the board. The final component is very low, straight and fast centerline rocker, which cuts a massively deep concave through the rail rocker.

Lost Pelagic Surfboard Details:


6'1 x 21.25" x 2.63"

FCS 5-Fin

37.13 Cubic Liters Learn More

Derived from the Whiplash-TB. The TB-Stepdown is more of an “every-mans” high performance shortboard. Used by many WT and Qualifying Series competitors, because it works equally well in small junk surf. Featuring the Same WL-TB, hyper extended tail rocker (for tight radius arcs off the back foot) but a significantly more relaxed entry rocker, which combined with a wider nose allows for more drive and forward momentum , and stability, with a bigger landing platform from reverse and tweaked airs. A wider hip and tail block is added to the outline in the tail for more lift at low speeds, but the tail width at 12” is relatively the same as the WL- TB. This allows for superior precision and control than most al other “grovel” boards. With the centerline and rail volume is carried farther into the rails….and out to nose and tail the TB-stepdown is designed to be ridden 1-2” shorter than the WLashTB. In the right size, this is a HP shortboard that can be ridden and enjoyed by most surfers.

Lost Taj Burrow Beach Buggy Details:

• 6'1 x 19.38 x 2.38"


• FCS Fins


• 29.79 Cubic Litres

Learn More

The Super Fish II has been updated for 2012 making one of the most popular boards even better. The idea behind the Super Fish design is to offer a board that rides, paddles and catches waves easily regardless of your ability.

The generous outline and smooth rocker makes this board incredibly easy to ride. One of the most notable features of the Super Fish design is the step deck. This gives the board greater buoyancy while maintaining a performance rail profile making the board sensitive and easier to turn.

The new bottom contour features a deep single-to-double concave providing greater speed and acceleration. The tail wings are now more defined creating bite off the bottom and quicker release through turns. The swallowtail is also shallower than before. This adds surface area under your back foot meaning more speed in flatter waves.

FCS plugs are set up in a tri-quad configuration so you can ride it as a thruster or a quad, and our X2 Epoxy technology uses a multi-layered sandwich process that produces a light yet incredibly durable surfboard that’s ideal for travel.

If you're looking for a high volume, easy to ride surfboard that'll increase your wave count then the Super Fish II is the board for you.

7S Super Fish II Surfboard Details:

• 6'3 x 20.5" x 2.5"


• 36.2 Cubic Litres


• FCS Fins (quad Set included)


• Waist to head high surf

Learn More