Skip to Store Area:

RIDER SHACK

Surfboard Fins

Surfboard Fins

Rider Shack stocks a great selection of surfboard fins from FCS and Futures. Just like surfboards, fins vary in size, shape, and style. Buying the right fin can make your surfboard feel magical while the wrong fin can make your board feel sluggish and dead. Click here to learn more about buying the right Surfboard Fins.

Need more help feel free to give us a call 877-577-4225 or send an email through our contact us page.

17 Item(s)

per page
Page:
  1. 1

Grid  List 

 ↑
Channel Islands Two Tab Tech 1 Surfboard Fins
$85.00
Add to Cart
Material: Time-tested polyester resin and fiberglass construction. Unique core construction reduces resin content and weight.

Performance: Our proprietary fiberglass weave and orientation is designed for maximum response and performance in a fiberglass fin. Al's design creates drive from the rake and base, while allowing pivot with the narrow tips and smaller center fin.

Color: Red

Size: M Learn More
Channel Islands Two Tab Tech 3 Surfboard Fins
$105.00
Add to Cart
Material: Proprietary Bi-axial Carbon/ Technora core provides engineered flex and reduces resin content and weight.

Performance: The uni-directional carbon allows for twists while maintaining stiffness. This combination of material and engineering provides the maximum pop and projection. Al's design creates drive from the rake and base, while allowing pivot with the narrow tips and smaller center fin.

Size: Large

Color: Green Learn More
FCS II JW Julian Wilson Thruster Surfboard Fins
$119.99
Add to Cart
The FCS II JW Julian Wilson surfboard fins are a great stiff medium sized fin. They are made from a fiberglass construction and are designed to use the FCS II snap in fin system.

This Package includes all 3 fins for a thruster setup Learn More
FCS II MB Matt Biolos Thruster Surfboard Fin Set
$119.95
Add to Cart
These FCS II MB thruster surfboard fins are Matt Biolo's fins from Lost surfboards. The fins are made with a honeycomb core and carbon strips, they are a large template and designed to be used with the FCS II snap in fin system.

This pack includes 3 fins for a Thruster setup Learn More
RFC Rusty 4.6" Future Surfboard Fins
$81.99
Add to Cart
These Rainbow Fin Co. fins are a Rusty 4.6" medium sized fin template with a Future fin base. These fins are made from fiberglass. Learn More
Rainbow Fin Co. Rake 7" Longboard Fin (Green Check)
$59.99
Add to Cart
The Rainbow Fin Co. 7" Rake longboard fin is a great all purpose surfboard fin. Learn More
Rainbow Fin Co MD3 7" Longboard Fin (Black/Red/White)
$76.00
Add to Cart
The Rainbow Fin Co. MD3 Longboard fin is a great single fin with a lot of flex in the tip. This type of fin works really great on hull style surfboards. Learn More
FCS 2 Carver Performance Core Surfboard FIn (M)
$90.00
Add to Cart
The Carver Thruster Fin Set up by FCS is an elongated fin for performing long arcing turns. It has a high degree of sweep angle that provides exceptional control off the bottom and when carving on the open face. The carver was designed for power surfers who like to push hard against their fins and draw out their turns.

Fin Details:
FCS 2 System
Carver Fins
Performance Core Construction
Size Medium Learn More
FCS 2 Carver Carbon Surfboard FIn (Large)
$110.00
Add to Cart
The Carver Thruster Fin Set up by FCS is an elongated fin for performing long arcing turns. It has a high degree of sweep angle that provides exceptional control off the bottom and when carving on the open face. The carver was designed for power surfers who like to push hard against their fins and draw out their turns.

Fin Details:
FCS 2 System
Carver Fins
Carbon Construction
Size Large Learn More
FCS 2 Carver Carbon Surfboard Fin (Medium)
$110.00
Add to Cart
The Carver Thruster Fin Set up by FCS is an elongated fin for performing long arcing turns. It has a high degree of sweep angle that provides exceptional control off the bottom and when carving on the open face. The carver was designed for power surfers who like to push hard against their fins and draw out their turns.

Fin Details:
FCS 2 System
Carver Fins
Carbon Construction
Size Medium Learn More
FCS 7" Dolphin Effect Longboard Fin
$79.99
Add to Cart
The FCS Dolphin Effect longboard fin is a screw less fin that allows easy movement of your longboard fin both in and out of the water.

The FCS Dolphin Perfomance Core longboard fin is a great lightweight fin. This fin has a stiff carbon base with great flex through the top third of the fin. This fin will have great performance and quick response in the water. Learn More
Futures Clay Marzo CM2 Techflex Surfboard Fins
$100.00
Add to Cart

This Future fin set is Clay Marzo's next incarnation featuring an updated template and built in Future's Techflex construction for powerful surfing. The large base provides drive off the bottom while the small tip allows you to release the fins.


Future CM2 Fin Details:


Height: 4.56 in, 11.58 cm


Base: 4.49 in, 11.40 cm


Area: 14.48 sq in, 93.42 sq cm

Learn More
FCS Knubster VS Surfboard Fin
$16.00
Add to Cart

The FCS VS KNUBSTER is essentially a centre fin that can be added to any quad set-up. The fin will increase drive and provide directional control through turns, without sacrificing speed, flow, or the freedom of movement typically associated with a quad.


The “KNUBSTER” is designed with a single tab that allows the fin to be positioned in the forward and rear centre plug to cater for the individual drive requirements of each surfer.


The FCS VS KNUBSTER, which is 3 3/4” by 2” high, was the 5th fin Kelly Slater used in his boards during the Quiksilver Pro in New York. According to Kelly’s report, “The KNUBSTER makes your quad set-up feel faster, smoother, and it adds a little more control. It just tightens everything it up a bit”.


Interestingly Kelly was riding the FCS VS KNUBSTER when he scored his two 10 point rides in 2011. The first at the Quiksilver Pro in NY where he performed one of the best airs ever seen in competition, and the second at The Rip Cur Pro in Portugal in heaving barrels.


Adding the FCS VS KNUBSTER to your quad set-up is an affordable way to add a new dimension


to your surfing. FCS recommends using the fin with the FCS K2.1 Quad.

Learn More
FCS M.R TFX Twin Surfboard Fins with Trailer (Green)
$99.95
Add to Cart

This FCS Twin Fin Template is constructed using FCS' Performance Core Technology with a carbon base for extreme surfing conditions. This fin is based on Mark Richards fin template and has a trailing stabilizing fin included.


Performance Core material and construction is designed to deliver the feeling of a tradtional glass fin with the added performance of reduced weight. The result is a lightweight fin with remarkable flex, a smooth feel and an impressive aesthetic.


FCS M.R TFX Fin Details:



  • Base: 5.06"

  • Depth: 5.58"

  • Area: 21.05"

  • Sweep: 33 degrees

  • Foil: Flat


Rear fin details:



  • Base: 3.55"

  • Depth: 3.66"

  • Area: 9.61"

  • Sweep: 31 degrees

Learn More
Future FYU (450) RTM Thruster Fin Set
$82.00
Add to Cart

A high performance finfor thefast lighter rider. Lots of drive and easy release off the top.


Hex RTM


Lighteight foam hex core glass fin that has the look and feel of a glass-on fin. Engineered with a medium flex pattern.  Great for all conditions.


 


Height:  4.59 in. (11.66cm)


Base:  4.45in (11.30cm)


Area:  14.91 sq. in. (96.19 sq. cm.)

Learn More
FCS Lost GMB Performance Core Thruster Fins
$99.99
Add to Cart

This FCS surfboard fin set is Lost's Matt Biola fin template. This is a great fin for a bigger surfer, more hold or bigger waves. 

Performance Core
Performance Core material and construction is designed to deliver the feeling of a tradtional glass fin with the added performance of reduced weight. The result is a lightweight fin with remarkable flex, a smooth feel and an impressive aesthetic.

GMB

A Livley combination of projection and maneuverability from Matt Biolo's favorite templates refined with feedback from his lost team riders.

Base: 4.41" 112.0mm
Depth: 4.74" 120.0mm
Area: 15.26" 9847mm
Sweep: 32.9 degrees

Flex Rating: 1

Size: L

Learn More
FCS Simon Anderson SA-2 Performance Core Quad Surfboard Fin Set Large
$109.95
Add to Cart
25 years after designing the thruster, Simon Anderson is producing quads. These FCS Quad Surfboard fins are for his small wave quad boards. Both the front and rear fins have proportionally the same outline resulting in superior handling, speed and control. The Medium template will suit small to medium surfers while the Large template will cater for larger surfers. Learn More

17 Item(s)

per page
Page:
  1. 1

Grid  List 

 ↑