This wide base longboard fin is a great basic affordable surfboard fin. This fin has a wide template which offers great hold and drive. Learn More

The FCS Perfromance Core Ignition longboard fin features a foiled bamboo core that enhances the performance by harnessing the natural flex properties of wood. Carbon inserts in the base create a stiff foundation to effectively flex and store energy when the fin is under pressure during turns and nose riding. Learn More

The FCS 3DS trailer fin is a side fin with unique wing tip design in stiff, lightweight PC construction increases speed, maneuverability and flow. This set of fins would be a great addition as quad trailers or as sidebite fins on a longer board. Learn More

The Future TMF trailer fin is a 5th fin knubster to be used as a center trailing fin for quad setups. This fin will add stability to your quad fin surfboard and enable tighter arcing turns. Learn More

The Future QD2 400 fin set is a quad trailer fin with the 1/2" box for Future fins quad setups. This includes a set of 2 rear trailer fins.

Fin Height: 4" Learn More

The Future F4 QD2 375 Quad fin setup is one of the most popular templates available as a quad setup. The F4 is a great for template medium sized riders looking for a fin that is a little looser or for smaller sized riders looking for a setup with a little more drive.

Front Fins:

Height: 4.37 in, 11.10 cm
Base: 4.22 in, 10.72 cm
Area: 14.22 sq in, 91.74 sq cm

Rear Fins:

Height: 3.75 in, 9.53 cm
Base: 3.64 in, 9.25 cm
Area: 10.90 sq in, 70.32 sq cm
Learn More

The YU fin set is Futures smallest quad fin. An upright template with a medium base and thin tip was designed for pivoty in the pocket surfing. This V2 quad was created to improve flow and generating speed.  

Future YU Quad Details:

Front Fins:

Height:     4.51    in,        11.46    cm
Base:       4.04    in,        10.26    cm
Area:      13.48    sq in,    86.97    sq cm       

Quad Trailers:

Height:     3.76    in,        9.55    cm
Base:       3.23    in,        8.20    cm
Area:      8.72    sq in,    56.26    sq cm

 

Learn More

These FCS H-3 Nexus quad trailer fins are a great high performance fin set for your surfboard. Made with Tricoil technology.

FCS H-3 Details:

• Base 3.93"


• Depth 4.29"


• Area 12.03"


• Sweep 28.5 degrees


• Foil 80/20

Learn More

This FCS PG-7 Carbon Fin set is based on FCS' classic large template. This fin set is constructed from performance glass(PG) with a carbon back for extra hold and power through turns.

Performance Glass material and construction is designed to deliver the feeling and flex of a tradtional glass fin. Offering a stiff base, subtle repsonsive tip flex, and proven durability, PG fins are enhanced by highly accurate machine cut foils. 

FCS PG-7 Carbon Fin Details: 

• Base: 4.52" 111.0mm


• Depth: 4.67" 119.0mm


• Area: 15.71" 10137mm


• Sweep: 33 degrees

Learn More

This FCS fin is a a modified classic. Just like the PC-7 template with a bamboo core & carbon base. This is a lightweight fin with a stiff base to hold through turns and give great flex off the top

Performance Core

Performance Core material and construction is designed to deliver the feeling of a tradtional glass fin with the added performance of reduced weight. The result is a lightweight fin with remarkable flex, a smooth feel and an impressive aesthetic.

PC-3, PC-5, PC-7

Resin transfer molding allows the PC fins to be made stiffer with the additional benefit of reduced weight. This stiffer flex pattern allows you to push extremely hard through turns while inside Foil Technology provides increased drive. Another favorite with the pro's the PC fins will suit the more powerful surfer or those wanting to push each turn to the limit.

PC-7

Base: 4.52" 111.0mm
Depth: 4.67" 119.0mm
Area: 15.71" 10137mm
Sweep: 33 degrees

Flex Rating: 2

Size: L

Learn More

This FCS fin is a a modified classic. Just like the PC-5 template with a bamboo core & carbon base. This is a lightweight fin with a stiff base to hold through turns and give great flex off the top

Performance Core

Performance Core material and construction is designed to deliver the feeling of a tradtional glass fin with the added performance of reduced weight. The result is a lightweight fin with remarkable flex, a smooth feel and an impressive aesthetic.

PC-3, PC-5, PC-7

Resin transfer molding allows the PC fins to be made stiffer with the additional benefit of reduced weight. This stiffer flex pattern allows you to push extremely hard through turns while inside Foil Technology provides increased drive. Another favorite with the pro's the PC fins will suit the more powerful surfer or those wanting to push each turn to the limit.

PC-5

Base: 4.37" 111.0mm
Depth: 4.55" 115.0mm
Area: 14.76" 9525mm
Sweep: 33 degrees

Flex Rating: 2

Size: M

Learn More

These FCS surfboard fins are constructed from FCS' ultralight material and have added carbon to control flex and response.

FCS Surfboard Fin Details:

• Base: 4.52" 115mm


• Depth: 4.67" 119mm


• Area: 15.71" x 10137"


• Sweep: 33 degrees


• Foil: IFT

Ultralight (UL) construction has been developed by FCS to create the lightest possible fin while ensuring strength, foil accuracy, and superior flex properties. By minimizing weight without sacrificing response of flex and strength, Ultralight delivers exceptional all-round performance.

Learn More

These Future sidebite fins are great for side longboard fins. They will give you the extra needed hold for jamming out those bottom turns. These fins have the 3/4" mounting depth.

Material: Natural Composite Molded-resin with long fiberglass matrix, this composite material fuses into a sensitive, snappy and lightweight fin that retains the proper flex pattern for performance.  Super light material that practically floats.

Learn More

The FCS H-3 NEXUS surfboard fin features TRICOIL technology, a dynamic flex pattern that effectively stores and releases energy as the surfer transitions from one turn into the next. This transition between turns is where most surfers struggle to maintain speed. FCS has solved this problem by designing a fin with a highly efficient template, material stability, minimal drag characteristics, and above all, unparalleled flex properties. From the moment you ride the FCS H-3 NEXUS you’ll realize this fin has something special. Whether your surfing tight in the pocket or carving on the open face, you can surf confidently knowing all the elements of the fin are working in synergy to deliver the ultimate advantage, more speed. The performance of the H-3 Nexus is seamless; yet quite deliberate in the way it feels. Learn More

The FCS H-3 NEXUS surfboard fin features TRICOIL technology, a dynamic flex pattern that effectively stores and releases energy as the surfer transitions from one turn into the next. This transition between turns is where most surfers struggle to maintain speed. FCS has solved this problem by designing a fin with a highly efficient template, material stability, minimal drag characteristics, and above all, unparalleled flex properties. From the moment you ride the FCS H-3 NEXUS you’ll realize this fin has something special. Whether your surfing tight in the pocket or carving on the open face, you can surf confidently knowing all the elements of the fin are working in synergy to deliver the ultimate advantage, more speed. The performance of the H-3 Nexus is seamless; yet quite deliberate in the way it feels. Learn More

The FCS H-3 NEXUS surfboard fin features TRICOIL technology, a dynamic flex pattern that effectively stores and releases energy as the surfer transitions from one turn into the next. This transition between turns is where most surfers struggle to maintain speed. FCS has solved this problem by designing a fin with a highly efficient template, material stability, minimal drag characteristics, and above all, unparalleled flex properties. From the moment you ride the FCS H-3 NEXUS you’ll realize this fin has something special. Whether your surfing tight in the pocket or carving on the open face, you can surf confidently knowing all the elements of the fin are working in synergy to deliver the ultimate advantage, more speed. The performance of the H-3 Nexus is seamless; yet quite deliberate in the way it feels. Learn More

This FCS fin set is a lightweight high performance quad set. Featuring
PC 7 surfboard fins in the front with the new G-XQ in the rear.
The G-XQ was designed specifi cally for quads and has an
80/20 foil to maximize the effi ciency of the fi n allowing for
use across a variety of toe angles in quad set ups.

Q-PC7 Front
Base: 4.52" 115.0mm
Depth: 4.67" 119.0mm
Area: 15.71"² 10137mm²
Sweep: 33°

Rear
Base: 3.86" 98.0mm
Depth: 3.93" 100mm
Area: 11.07"² 7140mm²
Sweep: 33.2°

Learn More