The Future Performance glass longbaord fin is a great all around longboard template that works great as a single fin or a 2+1 fin setup. This fin has great hold and drive through the base and enough flex in the tip for easy turning. Learn More

The FCS Finger longboard surf fin has a small base, long rake and fuller tip. This allows the fin to turn easily but still have hold on the nose and drive down the line. Learn More

The FCS Finger longboard surf fin has a small base, long rake and fuller tip. This allows the fin to turn easily but still have hold on the nose and drive down the line. Learn More

The FCS Kai Sallas longboard fin is a high perormance longboard template. This fin has extra length at the base of the trailing edge adding more hold and drive. The base quickly narrows towards the tip for acute directional changes. This fin has a stiff base with smooth flex through the top third of the fin. This fin is ideal for 2+1 fin setups. Learn More

The FCS Dolphin Perfomance Core longboard fin is a great lightweight fin. This fin has a stiff carbon base with great flex through the top third of the fin. This fin will have great performance and quick response in the water, Learn More

The Futures Josh Mulcoy 5 fin set is an upright template making the fin very fast and pivoty. Designed for tight vertical snaps and critical surfing. Riding the quad rears instead of the center fin will add drive and hold.

Front Fins:
Height: 4.55 in, 11.56 cm
Base: 4.24 in, 10.77 cm
Area: 14.57 sq in, 94.00 sq cm

Quad Rears:
Height: 3.79 in, 9.63 cm
Base: 3.80 in, 9.65 cm
Area: 11.08 sq in, 71.48 sq cm

Center Fin:
Height: 4.55 in, 11.56 cm
Base: 4.24 in, 10.77 cm
Area: 14.57 sq in, 94.00 sq cm Learn More

The FCS VS KNUBSTER is essentially a centre fin that can be added to any quad set-up. The fin will increase drive and provide directional control through turns, without sacrificing speed, flow, or the freedom of movement typically associated with a quad.

The “KNUBSTER” is designed with a single tab that allows the fin to be positioned in the forward and rear centre plug to cater for the individual drive requirements of each surfer.

The FCS VS KNUBSTER, which is 3 3/4” by 2” high, was the 5th fin Kelly Slater used in his boards during the Quiksilver Pro in New York. According to Kelly’s report, “The KNUBSTER makes your quad set-up feel faster, smoother, and it adds a little more control. It just tightens everything it up a bit”.

Interestingly Kelly was riding the FCS VS KNUBSTER when he scored his two 10 point rides in 2011. The first at the Quiksilver Pro in NY where he performed one of the best airs ever seen in competition, and the second at The Rip Cur Pro in Portugal in heaving barrels.

Adding the FCS VS KNUBSTER to your quad set-up is an affordable way to add a new dimension

to your surfing. FCS recommends using the fin with the FCS K2.1 Quad.

Learn More

Mick Fanning is considered one of the true icons in surfing. His career to date is highlighted by multiple event wins and a staggering two ASP World Titles in 2007 and 2009. Often regarded as the fastest surfer on the planet, this competitive machine is highly respected for his professionalism both in and out of the water. Mick’s surfing embodies speed, control, power, contemporary flare, and style; these are the essential ingredients that have him firmly cemented at the forefront of professional surfing.

This FCS MF-1 surfboard fin set has been designed with and for Mick Fanning. This fin set is a larger template which will be great for a larger surfer or for bigger waves.

FCS MF-1 Mick Fanning Fin Set Details:

• Drive- Mid-High


• Pivot- Long turning arcs


• Hold- Mid/More Holding Power


• Template Size- Large

Fins Specs:

• Base: 4.52" 115mm


• Depth: 4.67" 119mm


• Area: 15.71" 10137mm


• Sweep: 33 degrees


• Foil: Flat

Learn More

This FCS PG-5 Carbon Fin set is based on FCS' classic medium template. This fin set is constructed from performance glass(PG) with a carbon back for extra hold and power through turns.

Performance Glass material and construction is designed to deliver the feeling and flex of a tradtional glass fin. Offering a stiff base, subtle repsonsive tip flex, and proven durability, PG fins are enhanced by highly accurate machine cut foils. 

FCS PG-5 Carbon Fin Details: 

• 
  
  Base: 4.37" 111.0mm
  
  


• 
  
  Depth: 4.55" 115.0mm
  
  


• 
  
  Area: 14.76" 9525mm
  
  


• 
  
  Sweep: 33 degrees
  
  

Learn More

This FCS PG-5 Carbon fin set is based off of FCS' classic template and made from Performance Glass with a carbon back for extra stiffness.

Performance Glass construction delivers characteristics and flex properties identical to traditional fiberglass fins. Offering a stiff base, subtle responsive tip flex, and proven durability, PG fins are enhanced by highly accurate machine cut foils.

FCS PG-5 Carbon Fin Details:

Base: 4.28" 109.0mm
Depth: 4.41" 112.0mm
Area: 14.22"² 9172mm²
Sweep: 31°

 

 

Learn More

These FCS surfboard fins are constructed from FCS' ultralight material and have added carbon to control flex and response.

FCS Surfboard Fin Details:

• Base: 4.37" 111mm


• Depth: 4.55" x 115mm


• Area: 14.76" x 9525mm


• Sweep: 33 degrees


• Foil: IFT

Ultralight (UL) construction has been developed by FCS to create the lightest possible fin while ensuring strength, foil accuracy, and superior flex properties. By minimizing weight without sacrificing response of flex and strength, Ultralight delivers exceptional all-round performance.

Learn More

These FCS surfboard fins are constructed from FCS' ultralight material and have added carbon to control flex and response.

FCS Surfboard Fin Details:

• Base: 4.28" 109mm


• Depth: 4.41" 112mm


• Area: 14.22" 9172mm


• Sweep: 31 degrees


• Foil: IFT

Ultralight (UL) construction has been developed by FCS to create the lightest possible fin while ensuring strength, foil accuracy, and superior flex properties. By minimizing weight without sacrificing response of flex and strength, Ultralight delivers exceptional all-round performance.

Learn More

Performance Core

Performance Core material and construction is designed to deliver the feeling of a tradtional glass fin with the added performance of reduced weight. The result is a lightweight fin with remarkable flex, a smooth feel and an impressive aesthetic.

PC-3, PC-5, PC-7

Resin transfer molding allows the PC fins to be made stiffer with the additional benefit of reduced weight. This stiffer flex pattern allows you to push extremely hard through turns while inside Foil Technology provides increased drive. Another favorite with the pro's the PC fins will suit the more powerful surfer or those wanting to push each turn to the limit.

PC-5

Base: 4.37" 111.0mm
Depth: 4.55" 115.0mm
Area: 14.76" 9525mm
Sweep: 33 degrees

Flex Rating: 2

Size: M

Learn More

These FCS GX Fins work great as trailing fins for a quad setup or a longboard fin. These Are constructed from FCS performance core material.
Learn More

These FCS GX Fins work great as trailing fins for a quad setup or a longboard fin. These Are constructed from FCS performance core material.
Learn More

These FCS Simon Anderson surfboard fins deliver an even blend of drive and pivot with exceptional hold.

Performance Core
Performance Core material and construction is designed to deliver the feeling of a tradtional glass fin with the added performance of reduced weight. The result is a lightweight fin with remarkable flex, a smooth feel and an impressive aesthetic.

FCS SA-2 Surfboard Fin Details:

• Base: 4.41" 112.0mm


• Depth: 4.67" 117.0mm


• Area: 15.12"² 9756mm²


• Sweep: 35.0°


• Inside Foil Technology


• Large Size Fin

Learn More

These FCS Simon Anderson surfboard fins deliver an even blend of drive and pivot with exceptional hold.

Performance Core
Performance Core material and construction is designed to deliver the feeling of a tradtional glass fin with the added performance of reduced weight. The result is a lightweight fin with remarkable flex, a smooth feel and an impressive aesthetic.

FCS SA-1 Surfboard Fin Details:

 

• Base: 4.26" 108.0mm


• Depth: 4.45" 113.0mm


• Area: 14.05"² 9067mm²


• Sweep: 35.5°


• Inside Foil Technology

Learn More

25 years after designing the thruster, Simon Anderson is producing quads. These FCS Quad Surfboard fins are for his small wave quad boards. Both the front and rear fins have proportionally the same outline resulting in superior handling, speed and control. The Medium template will suit small to medium surfers while the Large template will cater for larger surfers. Learn More

This FCS fin set is a lightweight high performance quad set. Featuring
PC 5 surfboard fins in the front with the new G-XQ in the rear.
The G-XQ was designed specifi cally for quads and has an
80/20 foil to maximize the effi ciency of the fi n allowing for
use across a variety of toe angles in quad set ups.

Q-PC5 Front
Base: 4.37" 111.0mm
Depth: 4.55" 115.0mm
Area: 14.76"² 9525mm²
Sweep: 33°

Rear
Base: 3.86" 98.0mm
Depth: 3.93" 100mm
Area: 11.07"² 7140mm²
Sweep: 33.2°

Learn More

25 years after designing the thruster, Simon Anderson is producing quads. These FCS Quad Surfboard fins are for his small wave quad boards. Both the front and rear fins have proportionally the same outline resulting in superior handling, speed and control. The Medium template will suit small to medium surfers while the Large template will cater for larger surfers. Learn More