Skip to Store Area:

RIDER SHACK

Surfboard Fins

Surfboard Fins

Rider Shack stocks a great selection of surfboard fins from FCS and Futures. Just like surfboards, fins vary in size, shape, and style. Buying the right fin can make your surfboard feel magical while the wrong fin can make your board feel sluggish and dead. Click here to learn more about buying the right Surfboard Fins.

Need more help feel free to give us a call 877-577-4225 or send an email through our contact us page.

9 Item(s)

per page
Page:
  1. 1

Grid  List 

 ↓
FCS PC-3 Thruster Surfboard Fin Set
$79.95
Add to Cart

Performance Core

Performance Core material and construction is designed to deliver the feeling of a tradtional glass fin with the added performance of reduced weight. The result is a lightweight fin with remarkable flex, a smooth feel and an impressive aesthetic.

PC-3, PC-5, PC-7

Resin transfer molding allows the PC fins to be made stiffer with the additional benefit of reduced weight. This stiffer flex pattern allows you to push extremely hard through turns while inside Foil Technology provides increased drive. Another favorite with the pro's the PC fins will suit the more powerful surfer or those wanting to push each turn to the limit.

PC-3

Base: 4.28" 109.0mm
Depth: 4.41" 112.0mm
Area: 14.22" 9172mm
Sweep: 31 degrees

Flex Rating: 1

Size: S

Learn More
Future FYU (450) RTM Thruster Fin Set
$82.00
Add to Cart

A high performance finfor thefast lighter rider. Lots of drive and easy release off the top.


Hex RTM


Lighteight foam hex core glass fin that has the look and feel of a glass-on fin. Engineered with a medium flex pattern.  Great for all conditions.


 


Height:  4.59 in. (11.66cm)


Base:  4.45in (11.30cm)


Area:  14.91 sq. in. (96.19 sq. cm.)

Learn More
FCS Knubster VS Surfboard Fin
$16.00
Add to Cart

The FCS VS KNUBSTER is essentially a centre fin that can be added to any quad set-up. The fin will increase drive and provide directional control through turns, without sacrificing speed, flow, or the freedom of movement typically associated with a quad.


The “KNUBSTER” is designed with a single tab that allows the fin to be positioned in the forward and rear centre plug to cater for the individual drive requirements of each surfer.


The FCS VS KNUBSTER, which is 3 3/4” by 2” high, was the 5th fin Kelly Slater used in his boards during the Quiksilver Pro in New York. According to Kelly’s report, “The KNUBSTER makes your quad set-up feel faster, smoother, and it adds a little more control. It just tightens everything it up a bit”.


Interestingly Kelly was riding the FCS VS KNUBSTER when he scored his two 10 point rides in 2011. The first at the Quiksilver Pro in NY where he performed one of the best airs ever seen in competition, and the second at The Rip Cur Pro in Portugal in heaving barrels.


Adding the FCS VS KNUBSTER to your quad set-up is an affordable way to add a new dimension


to your surfing. FCS recommends using the fin with the FCS K2.1 Quad.

Learn More
RFC Rusty 4.6" Future Surfboard Fins
$81.99
Add to Cart
These Rainbow Fin Co. fins are a Rusty 4.6" medium sized fin template with a Future fin base. These fins are made from fiberglass. Learn More
Channel Islands Two Tab Tech 1 Surfboard Fins
$85.00
Add to Cart
Material: Time-tested polyester resin and fiberglass construction. Unique core construction reduces resin content and weight.

Performance: Our proprietary fiberglass weave and orientation is designed for maximum response and performance in a fiberglass fin. Al's design creates drive from the rake and base, while allowing pivot with the narrow tips and smaller center fin.

Color: Red

Size: L Learn More
Futures JC1 Blackstix 3.0 Surfboard Fins
$120.00
Add to Cart
The JC1 Blackstix was designed by John Carper of JC Surfboards as a springy fin with a V2 foil for the powerful surfer looking to build speed and drive in smaller waves. The JC1 is a traditional template with a refined base that carries through to a fuller tip, which is meant to hold through turns. Learn More
FCS II Jeremy Flores Surfboard Fins
$120.00
Add to Cart
The FCS II Jeremy Flores surfboard fin is great for driving off the bottom and performing fast turns.

Fin Details:

Material: Performance Glass (PG) material characteristics and flex pattern are identical to traditional fibreglass fins offering a stiff base with subtle responsive tip flex, amazing aesthetics and proven durability. PG fins are the perfect transition fin for surfers moving from fixed fins to the convenience, accuracy and performance of FCS.

Size: MEDIUM (65 - 80Kg / 145 - 175 Lbs)

FIN SPECS

Base: 4.65" / 118mm
Depth: 4.58" / 116mm
Area: 14.96"² / 9652 mm²
Sweep: 33.7°
Foil: Flat Learn More
Future Fins Seaworthy Controller Quad Surfboard Fin
$116.00
Add to Cart
This template is a rendition of the Controller template remixed by "Mayhem" Matt Biolos, drawing a little more rake on the back fin. The design of this template was created with shapes like the Monkfish, Bottomfeader, Lazyboy and Couch Potato in mind. Learn More
Future Fins Lost Matt Biolos Medium Thruster Set
$100.00
Add to Cart
This Future fin set is a thruster set and is Lost's Matt Biolos fin template. This is a medium template great for surfers in the 145lb-195lb weight range. A lightweight hexagonal core gives these fins the feel of glass-ons. Engineered with a medium flex pattern, stiffer than Blackstix but more flexible than Fiberglass. These fins have an inside flat foil. Flat foiled fins break free sooner, and are better at controlling speed. Often surfers prefer them in fast powerful surf where they do not need to create additional speed. If you have muscle memory from riding glass-ons, flat foiled fins will feel the closest.

Lost Medium Fin Details:

SIDE FINS:
HEIGHT: 4.50"
BASE: 4.36"
AREA: 14.45"

CENTER FIN:
HEIGHT: 4.50"
BASE: 4.36"
AREA: 14.45" Learn More

9 Item(s)

per page
Page:
  1. 1

Grid  List 

 ↓