Skip to Store Area:

RIDER SHACK

FCS
See other products by FCS


FCS H-3 Nexus Thruster Surfboard Fin Set (small)

Email to a Friend

The FCS H-3 NEXUS surfboard fin features TRICOIL technology, a dynamic flex pattern that effectively stores and releases energy as the surfer transitions from one turn into the next. This transition between turns is where most surfers struggle to maintain speed. FCS has solved this problem by designing a fin with a highly efficient template, material stability, minimal drag characteristics, and above all, unparalleled flex properties. From the moment you ride the FCS H-3 NEXUS you’ll realize this fin has something special. Whether your surfing tight in the pocket or carving on the open face, you can surf confidently knowing all the elements of the fin are working in synergy to deliver the ultimate advantage, more speed. The performance of the H-3 Nexus is seamless; yet quite deliberate in the way it feels.


Flex


To make a fin that performs more efficiently we had to ensure it could flex in multiple directions. FCS TRICOIL Technology is the latest development in fin flexion which draws on the material lay-up of the fin, the cambered foil, and the overall fin template. The result is a multi-directional flex pattern. This unique flex pattern allows the fin to load-up and flex under pressure, and then de-coil once the pressure is released. Ultimately the fin stores energy during the transition between turns and then gives it back to the surfer in the form of speed and acceleration. The feeling can be compared to a slingshot, or whipping effect as the surfer enters and then exits through the turning arc.


Foil



A highly efficient foil can be the defining element that makes for exceptional fin performance. The highly cambered foil in the base of the fin provides drive and hold, the low cambered foil in the tip provides stability and allows the fin to release with control, even when the fin is pushed to the limits. This cambered foil also increases the fins stall angle which helps to produce down-the-line speed and maintain projection through the entire turning arc.



Details:


Base: 4.27"


Depth: 4.31"


Area: 13.29"


Sweep: 34 degrees


Cant: 0 degrees




Template




The FCS H-3 NEXUS features an efficient, low aspect ratio elliptical template. The long base increases drive, moderate volume in the tip enhances the flex and coil characteristics, and the smooth transitional trailing edge reduces water separation  which is traditional linked to cavitation. Translated, this means increased speed and drive through minimal water disturbance.


Visually it’s easy to see how technology and performance overlap. Structurally, the fin draws on a combination of engineered Bi-axial Carbon and Uni-directional Kevlar to achieve the TRICOIL flex pattern. The Uni-directional carbon base further increases stiffness in the base of the fin, and helps to distribute pressure away from the plugs by reducing the twisting forces on the fin tabs. The Resin Transfer Moulding (RTM) process delivers consistency across manufacturing and guarantees the integrity of the flex and foils. Epoxy resin is used to provide strength and material stability, while the lightweight moulded PU core further reduces the overall weight of the fin.


Construction


 


Availability: Out of stock

Regular Price: $129.95

Special Price: $103.96

Brand FCS
Color Black
Fin Template Size S
Fin Type Thruster Set
Description

The FCS H-3 NEXUS surfboard fin features TRICOIL technology, a dynamic flex pattern that effectively stores and releases energy as the surfer transitions from one turn into the next. This transition between turns is where most surfers struggle to maintain speed. FCS has solved this problem by designing a fin with a highly efficient template, material stability, minimal drag characteristics, and above all, unparalleled flex properties. From the moment you ride the FCS H-3 NEXUS you’ll realize this fin has something special. Whether your surfing tight in the pocket or carving on the open face, you can surf confidently knowing all the elements of the fin are working in synergy to deliver the ultimate advantage, more speed. The performance of the H-3 Nexus is seamless; yet quite deliberate in the way it feels.

Flex

To make a fin that performs more efficiently we had to ensure it could flex in multiple directions. FCS TRICOIL Technology is the latest development in fin flexion which draws on the material lay-up of the fin, the cambered foil, and the overall fin template. The result is a multi-directional flex pattern. This unique flex pattern allows the fin to load-up and flex under pressure, and then de-coil once the pressure is released. Ultimately the fin stores energy during the transition between turns and then gives it back to the surfer in the form of speed and acceleration. The feeling can be compared to a slingshot, or whipping effect as the surfer enters and then exits through the turning arc.

Foil

A highly efficient foil can be the defining element that makes for exceptional fin performance. The highly cambered foil in the base of the fin provides drive and hold, the low cambered foil in the tip provides stability and allows the fin to release with control, even when the fin is pushed to the limits. This cambered foil also increases the fins stall angle which helps to produce down-the-line speed and maintain projection through the entire turning arc.

Details:

Base: 4.27"

Depth: 4.31"

Area: 13.29"

Sweep: 34 degrees

Cant: 0 degrees

Template

The FCS H-3 NEXUS features an efficient, low aspect ratio elliptical template. The long base increases drive, moderate volume in the tip enhances the flex and coil characteristics, and the smooth transitional trailing edge reduces water separation  which is traditional linked to cavitation. Translated, this means increased speed and drive through minimal water disturbance.

Visually it’s easy to see how technology and performance overlap. Structurally, the fin draws on a combination of engineered Bi-axial Carbon and Uni-directional Kevlar to achieve the TRICOIL flex pattern. The Uni-directional carbon base further increases stiffness in the base of the fin, and helps to distribute pressure away from the plugs by reducing the twisting forces on the fin tabs. The Resin Transfer Moulding (RTM) process delivers consistency across manufacturing and guarantees the integrity of the flex and foils. Epoxy resin is used to provide strength and material stability, while the lightweight moulded PU core further reduces the overall weight of the fin.

Construction

 

Write A Review

You're reviewing: FCS H-3 Nexus Thruster Surfboard Fin Set (small)

How many stars?*
  1 star 2 stars 3 stars 4 stars 5 stars
Price
Value
Quality




  • Now Prove You're Human ;)


Other people marked this product with these tags:
Add Your Tags:
Add Tags
Use spaces to separate tags. Use single quotes (') for phrases.

Questions?

FCS H-3 Nexus Thruster Surfboard Fin Set (small)

No questions asked yet



Ask Your Own Question






Featured Items:

Macks Pillow soft Silicone Earplugs for Surfing

Macks Pillow soft Silicone Earplugs for Surfing
$4.99
ADD TO CART

Lost 6'2 V2 Domesticated Shortboard Surfboard

Lost 6'2 V2 Domesticated Shortboard Surfboard

Regular Price: $675.00

Special Price: $459.99

ADD TO CART

Futures AM1 HC Thruster Surfboard Fin Set

Futures AM1 HC Thruster Surfboard Fin Set

Regular Price: $82.00

Special Price: $65.60

ADD TO CART

Used 5'10 Aleutian Juice Fish Surfboard

Used 5'10 Aleutian Juice Fish Surfboard

Regular Price: $350.00

Special Price: $315.00

ADD TO CART

Von Zipper Elmore Sunglasses

Von Zipper Elmore Sunglasses
$95.00
ADD TO CART