The world's all-time best selling fish model surfboard. During the filming of 5'5" REDUX, the RNF and RNF Quad were updated and fine tuned. The nose has gotten wider again, and more conservative overall rocker and less concave make for a board that will hold speed in flats and produce harder, longer carves.

A longer, less pronounced vee in the tail gives a more predictable feel out of turns, and a straighter outline adds drive and hold. The deep wing, influenced by MR's vintage twin fins, adds more control of high speeds and better bite in snaps and out of carves. It still paddles great, still makes you look good, but the updates allow harder, more powerful carving turns and a wider range of performance in more varied surf.

Enjoy playing with a multitude of fin setups. The RNF is designed as a twin with rear trailer, but works great as a pure twin fin or try all three standard thrusters for different feels in different conditions. ...Everyone should own one.

Lost Surfboard Details:

• 5'10 x 21" x 2.5"


• 35.16 Cubic Litres


• Future Fins


• Gloss & Polish Fins


• 2-6 foot surf

Learn More

The FCS Fatboy longboard surf fin is designed for on rail performance and nose riding. The thick foil in the base and tip is seperated by a thin foil section through the middle. The bulb like tip holds the tail of the surfboard in the water for nose riding. Learn More

This FCS Twin Fin Template is constructed using FCS' Performance Core Technology with a carbon base for extreme surfing conditions. This fin is based on Mark Richards fin template and has a trailing stabilizing fin included.

Performance Core material and construction is designed to deliver the feeling of a tradtional glass fin with the added performance of reduced weight. The result is a lightweight fin with remarkable flex, a smooth feel and an impressive aesthetic.

FCS M.R TFX Fin Details:

• Base: 5.06"


• Depth: 5.58"


• Area: 21.05"


• Sweep: 33 degrees


• Foil: Flat

Rear fin details:

• Base: 3.55"


• Depth: 3.66"


• Area: 9.61"


• Sweep: 31 degrees

Learn More

MINIGUN - Back by popular demand! Not a longboard or a cruiser, but a Minigun! Performs best on a wide canvas at a high speed, but it isn’t so gunny that you can’t stomp on the tail and turn on a dime if needed. The Minigun features our custom Camber/Rocker combo flex mold for compression pumping speed when carving on wide open terrain. The large wheelbase helps to cover distance with ease and inpires wide carving arcs with confidence and control. Deep concave to hold your feet in place and a kick tail to get out of trouble quickly.

_____________________________

DECK DIMENSIONS: 44 X 10 Inches

MOLD: Classic Concave + Kick

TRUCKS: ...Lost Stealth 10"

WHEELS: 62mm84a Blacksheep
Learn More

The FCS Ezi Trim longboard surfing fin is ideal for performance longboarding. The depth of the fin noticeably improves nose riding on modern high performance longboards. The reduced area gives the surfboard more manoeuvrability and greater speed. The notch improves flex in the tip providing more forgive-ness in tight arcs. Learn More

Rusty RTM Hex 5 fin surfboard set

Outline: Rusty

Height: 4.51 in

Base: 4.46 in

Area: 15.00 in²

Rusty and Futures collaborated to create a surfboard fin with a unique flex pattern that complements all boards, but works insane on EPS boards. Taking the honycomb out of the tip maximizes tip flex making the fins ultra responsive.

Hex RTM
Lightweight foam hex core glass fin that has the look and feel of a glass-on fin. Engineered with a medium flex pattern. Great for all conditions.

Learn More

The FCS Dolphin Perfomance Core longboard fin is a great lightweight fin. This fin has a stiff carbon base with great flex through the top third of the fin. This fin will have great performance and quick response in the water, Learn More

The Astrodeck John John surfboard traction pad is a 3 piece pad with center arch. Learn More

The FCS Kai Sallas longboard fin is a high perormance longboard template. This fin has extra length at the base of the trailing edge adding more hold and drive. The base quickly narrows towards the tip for acute directional changes. This fin has a stiff base with smooth flex through the top third of the fin. This fin is ideal for 2+1 fin setups. Learn More

The FCS Dolphin Perfomance Core longboard fin is a great lightweight fin. This fin has a stiff carbon base with great flex through the top third of the fin. This fin will have great performance and quick response in the water, Learn More

The Lost Lay-Zboy surfboard is both a continuation and a break away from the Bottom Feeder and Plank Genre surfboards. The Lay-Zboy takes these high volume low rocker small wave surfboard designs and brings it to a wider range of surf capabilities. This surfboard uses an eliptical outline influenced by Wayne Lynch & Michael Peterson in the 1970's as well as Dave Parmenter in the 80's and 90's. These eliptical outlines give the Lay-Zboy a very open and forgiving sweet spot and allow the board to be surfed in knee to well overhead waves.

Lost Lay-Zboy details:
6'0 x 21.25" x 2.56"
38.54 cubic litres
Future 5 fin set up
Epoxy Construction with Bamboo Deck Learn More

The FCS Fatboy longboard surf fin is designed for on rail performance and nose riding. The thick foil in the base and tip is seperated by a thin foil section through the middle. The bulb like tip holds the tail of the surfboard in the water for nose riding. Learn More

These Future fins are Jordy Smith's template and are designed for a smaller surfer.

Jordy Smith Fin Details:

Size: S 105-155lbs
Material: Honeycomb
Height:4.40"
Base: 4.45"
Area: 13.98" Learn More

The Carver Greenroom skateboard is a mid-sized board is the perfect retro rider; wide diamond tail for solid foot placement and stretched out wheelbase for wider stance and increased stability. The Artist Series graphic is by renowned surf artist Matt Beard.
•9 7/8" wide
•6 5/8"tail
•4 1/4" nose
•18 7/8"wheelbase
Learn More

The FCS Hatchet longboard fin is well suited for old style mals with soft rolled tail edges, and modern nose rider mals. The large surface area and upright shape proivides added drive, promotes a longer turning arc, and helps hold the tail in when nose riding. Learn More

This future fin set is a high aspect, high performance twin fin brainchild of Al Merrick and Future Fins. This is a fast fin with a loose feel. This pack includes a twin fin set with a trailer fin.

Hex RTM
Lightweight foam hex core glass fin that has the look and feel of a glass-on fin. Engineered with a medium flex pattern. Great for all conditions.

Learn More

36" Lola Carver Skateboard

One of Carver's most popular longboard lengths, the 36" Lola is such a versatile street surfer because of its balance between wheelbase and deck length in combination with their patented surfing truck systems. The medium length wheelbase is short enough to pump for speed on the flats, while the deck is long enough to either cruise to the market or get you down the biggest hills in town with full control. The pin-tail kick gives this cruiser the performance edge every serious longboard needs, with it's back foot wedge for pumping from the tail or popping over cracks, and the forward-set front truck placement for a little added stability at faster carving speeds.

• 9 7/8" wide


• 6 7/8" tail


• 4 1/2" nose


• 20 1/2" wheelbase

Learn More

The FCS Ezi Trim longboard surfing fin is ideal for performance longboarding. The depth of the fin noticeably improves nose riding on modern high performance longboards. The reduced area gives the surfboard more manoeuvrability and greater speed. The notch improves flex in the tip providing more forgive-ness in tight arcs. Learn More

These FCS GX Fins work great as trailing fins for a quad setup or a longboard fin. These Are constructed from FCS performance core material.
Learn More

The FCS Dolphin Perfomance Core longboard fin is a great lightweight fin. This fin has a stiff carbon base with great flex through the top third of the fin. This fin will have great performance and quick response in the water, Learn More

The Lost Couch Potato surfboard is the extreme small wave surfboard. It is wider, shorter, and has a really flat rocker. The outline and the rocker of this board make it extremely fast, yet very controllable in gutless surf.

Lost Couch Potato details:

5'6 x 21.5" x 2.38"
33.3 Cubic Litres
Futures 5 fin set up
1-4 foot surf
Learn More

The FCS Kai Sallas longboard fin is a high perormance longboard template. This fin has extra length at the base of the trailing edge adding more hold and drive. The base quickly narrows towards the tip for acute directional changes. This fin has a stiff base with smooth flex through the top third of the fin. This fin is ideal for 2+1 fin setups. Learn More