This FCS 5 fin Surfboard fin set can be used as a quad or a thruster. It was designed by William “Stretch” Riedel.
Features a moderate inside foil along a wide base, which generates signifi cant speed
from the initial turn, and a neutral foil along a thin, flat tip. At low speeds, the ample
surface area in the tip provides power, giving you the ability to generate speed with ease.

Performance Core
Performance Core material and construction is designed to deliver the feeling of a tradtional glass fin with the added performance of reduced weight. The result is a lightweight fin with remarkable flex, a smooth feel and an impressive aesthetic.

Front
Base: 4.48” 114mm
Depth: 4.48” 114mm
Area: 15.15”2 9776mm2
Sweep: 30.5°

Rear
Base: 3.88” 98mm
Depth: 3.80” 96mm
Area: 11.22”2 7238mm2
Sweep: 30.7°

Learn More

The FCS VS KNUBSTER is essentially a centre fin that can be added to any quad set-up. The fin will increase drive and provide directional control through turns, without sacrificing speed, flow, or the freedom of movement typically associated with a quad.

The “KNUBSTER” is designed with a single tab that allows the fin to be positioned in the forward and rear centre plug to cater for the individual drive requirements of each surfer.

The FCS VS KNUBSTER, which is 3 3/4” by 2” high, was the 5th fin Kelly Slater used in his boards during the Quiksilver Pro in New York. According to Kelly’s report, “The KNUBSTER makes your quad set-up feel faster, smoother, and it adds a little more control. It just tightens everything it up a bit”.

Interestingly Kelly was riding the FCS VS KNUBSTER when he scored his two 10 point rides in 2011. The first at the Quiksilver Pro in NY where he performed one of the best airs ever seen in competition, and the second at The Rip Cur Pro in Portugal in heaving barrels.

Adding the FCS VS KNUBSTER to your quad set-up is an affordable way to add a new dimension

to your surfing. FCS recommends using the fin with the FCS K2.1 Quad.

Learn More

Glass Flex

Glass Flex has been formulated to replicate the flex and memory properties of laminated fiberglass. Its advantages over other composite fin materials inlcude stiffness, a more positive flex pattern (nice tip flex, little base flex) and remarkable flex memory. The precision of the injection molding process ensures the highest accuracy in geometry in each fin produced.

M-series

Fast and smooth, with better hold and more squirt through turns. The M-series has a flexible tip for forgiveness and control at high speed. The new inside Foil Technology offers superior drive and hold. Glass Flex offers the flex pattern modeled off the hand foiled fiberglass fin and the ability to mold high technical computer generated foils accurately.

Base: 4.52" 115.0mm
Depth: 4.67" 119.0mm
Area: 15.71" 10137mm
Sweep: 33 degrees

Flex Rating: 1

Size: L

Learn More

This used 6'1 Anderson twin fin surfboard is in good condition. The board has some decent pressure denting on the deck.

Used Board Details:
6'1 x 19.75" x 2.5"
Future Fins (not included)
Rating (good) Learn More

The FCS H-3 NEXUS surfboard fin features TRICOIL technology, a dynamic flex pattern that effectively stores and releases energy as the surfer transitions from one turn into the next. This transition between turns is where most surfers struggle to maintain speed. FCS has solved this problem by designing a fin with a highly efficient template, material stability, minimal drag characteristics, and above all, unparalleled flex properties. From the moment you ride the FCS H-3 NEXUS you’ll realize this fin has something special. Whether your surfing tight in the pocket or carving on the open face, you can surf confidently knowing all the elements of the fin are working in synergy to deliver the ultimate advantage, more speed. The performance of the H-3 Nexus is seamless; yet quite deliberate in the way it feels. Learn More

The FCS Ezi Trim longboard surfing fin is ideal for performance longboarding. The depth of the fin noticeably improves nose riding on modern high performance longboards. The reduced area gives the surfboard more manoeuvrability and greater speed. The notch improves flex in the tip providing more forgive-ness in tight arcs. Learn More

The FCS H-3 NEXUS surfboard fin features TRICOIL technology, a dynamic flex pattern that effectively stores and releases energy as the surfer transitions from one turn into the next. This transition between turns is where most surfers struggle to maintain speed. FCS has solved this problem by designing a fin with a highly efficient template, material stability, minimal drag characteristics, and above all, unparalleled flex properties. From the moment you ride the FCS H-3 NEXUS you’ll realize this fin has something special. Whether your surfing tight in the pocket or carving on the open face, you can surf confidently knowing all the elements of the fin are working in synergy to deliver the ultimate advantage, more speed. The performance of the H-3 Nexus is seamless; yet quite deliberate in the way it feels. Learn More

This used 6'1 Surf Prescriptions surfboard is in fair/good condiiton and could be a great board with a little TLC.

Used Surfboard Details:
6'1 x 19.25" x 2 3/8"
Future Fins (not included)
Rating (fair/good) Learn More

This FCS Quad Surfboard fin set was designed by William “Stretch” Riedel.
Features a moderate inside foil along a wide base, which generates signifi cant speed
from the initial turn, and a neutral foil along a thin, flat tip. At low speeds, the ample
surface area in the tip provides power, giving you the ability to generate speed with ease.

Front
Base: 4.48” 114mm
Depth: 4.48” 114mm
Area: 15.15”2 9776mm2
Sweep: 30.5°

Rear
Base: 3.88” 98mm
Depth: 3.80” 96mm
Area: 11.22”2 7238mm2
Sweep: 30.7°

Learn More

The FCS 3DS trailer fin is a side fin with unique wing tip design in stiff, lightweight PC construction increases speed, maneuverability and flow. This set of fins would be a great addition as quad trailers or as sidebite fins on a longer board. Learn More

25 years after designing the thruster, Simon Anderson is producing quads. These FCS Quad Surfboard fins are for his small wave quad boards. Both the front and rear fins have proportionally the same outline resulting in superior handling, speed and control. The Medium template will suit small to medium surfers while the Large template will cater for larger surfers. Learn More

This used 6'1 Stamps surfboard is in fair condition and would make a great affordable shortboard.

Used Surfboard Details:
6'1 x 18.75" x 2 5/16"
Future Fins (not included)
Rating (fair) Learn More

Mick Fanning is considered one of the true icons in surfing. His career to date is highlighted by multiple event wins and a staggering two ASP World Titles in 2007 and 2009. Often regarded as the fastest surfer on the planet, this competitive machine is highly respected for his professionalism both in and out of the water. Mick’s surfing embodies speed, control, power, contemporary flare, and style; these are the essential ingredients that have him firmly cemented at the forefront of professional surfing.

This FCS MF-1 surfboard fin set has been designed with and for Mick Fanning. This fin set is a larger template which will be great for a larger surfer or for bigger waves.

FCS MF-1 Mick Fanning Fin Set Details:

• Drive- Mid-High


• Pivot- Long turning arcs


• Hold- Mid/More Holding Power


• Template Size- Large

Fins Specs:

• Base: 4.52" 115mm


• Depth: 4.67" 119mm


• Area: 15.71" 10137mm


• Sweep: 33 degrees


• Foil: Flat

Learn More

Glass Flex

Glass Flex has been formulated to replicate the flex and memory properties of laminated fiberglass. Its advantages over other composite fin materials inlcude stiffness, a more positive flex pattern (nice tip flex, little base flex) and remarkable flex memory. The precision of the injection molding process ensures the highest accuracy in geometry in each fin produced.

M-series

Fast and smooth, with better hold and more squirt through turns. The M-series has a flexible tip for forgiveness and control at high speed. The new inside Foil Technology offers superior drive and hold. Glass Flex offers the flex pattern modeled off the hand foiled fiberglass fin and the ability to mold high technical computer generated foils accurately.

Base: 4.37" 111.0mm
Depth: 4.55" 115.0mm
Area: 14.76" 9525mm
Sweep: 33 degrees

Flex Rating: 1

Size: M

Learn More

This used 6'1 JS Occy model surfboard is in good condiiton and would make a great high performance surfboard.

Used Surfboard Details:

6'1 x 18 5/8" x 2.25"
Future Fins
Rating (good) Learn More

The FCS H-3 NEXUS surfboard fin features TRICOIL technology, a dynamic flex pattern that effectively stores and releases energy as the surfer transitions from one turn into the next. This transition between turns is where most surfers struggle to maintain speed. FCS has solved this problem by designing a fin with a highly efficient template, material stability, minimal drag characteristics, and above all, unparalleled flex properties. From the moment you ride the FCS H-3 NEXUS you’ll realize this fin has something special. Whether your surfing tight in the pocket or carving on the open face, you can surf confidently knowing all the elements of the fin are working in synergy to deliver the ultimate advantage, more speed. The performance of the H-3 Nexus is seamless; yet quite deliberate in the way it feels. Learn More

The FCS Ezi Trim longboard surfing fin is ideal for performance longboarding. The depth of the fin noticeably improves nose riding on modern high performance longboards. The reduced area gives the surfboard more manoeuvrability and greater speed. The notch improves flex in the tip providing more forgive-ness in tight arcs. Learn More

25 years after designing the thruster, Simon Anderson is producing quads. These FCS Quad Surfboard fins are for his small wave quad boards. Both the front and rear fins have proportionally the same outline resulting in superior handling, speed and control. The Medium template will suit small to medium surfers while the Large template will cater for larger surfers. Learn More